Sequestrant Pool
If you have a pool, maintaining it is one of the main priorities to add on your list. Every week you should try to stay on top of the chemicals in your water. To do that, you will have to test the different levels of chlorine, pH, and calcium as well as adjusting them as you need.
Too many metal compounds can lead to water changing its color and becoming green or other shades. The same effect happens when algae accumulate inside your pool. Depending on the metal that contaminates your pool and the level of contamination, your walls could develop stains of different colors too. You can avoid such situations by using a good pool sequestrant.
What is a pool sequestrant and why you should use it
Sequestrants are chemical solutions used to clean metals in your swimming pool. You can use these products to get rid of metal contamination as well as to prevent such a situation from affecting your pool. To get the maximum results, you will have to add the sequestrant to your cleaning solution regularly. This practice will keep metals away and your pool clean for a long time.
You will also find these sequestrants under the name of chelants, and there are several products to choose from on the market.
Also, sequestrants are efficient at eliminating scale of different kinds from almost any surfaces. They maintain hardness ions from precipitating as well, including calcium and magnesium ions.
If you use an alkaline solution to clean your pool, you will need to add sequestrant to activate it and get rid of hardness ions. Strong acidic cleaning solutions are efficient at dissolving scale, so they might not need sequestrant. But this is not the norm for all of them, so it is only wise to have some sequestrant handy when you take care of your pool.
You will have to choose between a sequestrant that treats metal contamination and one that prevents it. Once you got your product, all you have left to do is use it for your pool maintenance.
How to use a pool sequestrant efficiently
Using these chemicals is not a complicated task. All of them come with instructions that you should try to follow to the best of your abilities. Here are a few steps to consider so you get the results you want.
Test your pool levels
Before treating your pool water, you should be well-aware of its original standards, so you know how you have to adjust them. Test your calcium, pH, chlorine levels by using a pool test kit. You can find these kits on the market at reasonably convenient costs. This step is easy to take so you can identify if there are unbalances in your pool that you need to address.
Clean your pool manually
Before adding any sequestrant or cleaning solution in your pool, you should try to remove as much residue as you can by using your hands and tools. Scrub the walls and the bottom of your pool until you eliminate as much waste as possible. You might get rid of significant stains and metal particles during this process.
Add the metal sequestrant
You can use a metal sequestrant by itself or mix it with your regular cleaning solution. This choice depends on the product and how much metal contamination you are dealing with in your pool. Check out the instructions of the sequestrant and use it accordingly. After you added the sequestrant in your pool, turn your filter on and give it up to 48 hours to get rid of all the metal particles.
Shock your pool
You might need to shock your pool by using chlorine when the 478 hours are over. Do this as you usually would and make sure your pool levels are in normal parameters by the end of the shocking process. It is better to give your filter an additional 24 hours of running after shocking the pool.
Check your water levels
To make sure everything is back to normal and you can use your pool again, check the levels of your water. You might need t increase or lower your pH during this final check. To increase it, use sodium carbonate, and to reduce it try muriatic acid.
If you did all the previous steps correctly, the sequestrant would get rid of the metal residue with no hassle. The quality of your sequestrant is also essential, so make sure you choose the right product for your pool. If you want to avoid metal residue from invading your pool, you should add sequestrant every time you clean your pool.
